datablad_Skipper_skrutvinge-modtager/holder

1. SKIPPER TM LIMITED 12 Wolfe Close, Parkgate Industrial Estate, Knutsford, Cheshire. WA16 8XJ DATA SHEET Clamp holder/receiver Product code: Clamp01 The clamp holder/receiver is used to attach the Skipper XS unit and/or tape end to angular surfaces such as door frames, work surfaces and racking. Simply position the clamp in place and turn the screw to tighten. The clamp holder/receiver can be positioned either horizontally or vertically depending on the desired application. Product Specifications Key selling points • Holds the Skipper XS unit via its connector points or receives any Skipper tape end clip • Perfect for door frames, worktops and racking Q. Does the clamp holder/receiver work with standard Skipper units? A. The clamp has a connector slot which allows it to receive tape end clips from both the standard Skipper units and Skipper XS units. It cannot be used to hold a standard Skipper unit, but will hold the Skipper XS unit. Q. What is the widest surface I can attach the clamp to? A. The clamp holder/receiver will attach to a surface up to 97mm wide. Overview Product FAQs Key features • Has an adjustable connector slot which allows it to connect both horizontally and vertically • Simply adjust the lower clamp up and down the rail to fit the desired surface • Soft pads to prevent scratching to surfaces Attach the Skipper XS unit to the clamp holder/receiver via one of its connector points. Width: 140mm Height: 233mm 5.5” 8.8” Depth: 103mm Weight: 205g 4.1” 7.2oz